Slot Machine Low Battery Voltage
Yes this is typical. Unless you replace the battery
with an alternate battery pack alligator cliped
to the original, you will have the problem you
describe.
by law the game has to remember like the last
100 pulls. if the battery goes low voltage, the
game monitors this and gives the 12 error code.
if you just cut the old battery out and put a new
one in, it loses its memory, and the game gives
a 61 error.
Slot Techs - main battery low - I had six of my machines go down about a month ago, after we did a move, IGT tech said it's the CPU board, my boss was going to order 6 new board at the cost of $1600.00 a board, I've have had this kind of experience with the boards before at the other Casino I worked at before, the 3.6volt vartar battery, the one that solder in showed way low that was change.
Slot Machine Low Battery Voltage Transformer
This is USUALLY easy to fix though. Get the
61 error, and with the front door open, press
the diagnostic button inside the game. You
should get a 'bling' noise, and then the error
code '61 1'. This is good.
- Slot car voltage and amperage - posted in General Technical Info & Advice: Hello,Can anyone give me an estimate for the voltage and amperage (I guess the running amperage) for a 1/24 and 1/32 car?I'm trying to find a solar panel that could handle the power draw of a 1/24 (or 1/32) track with at least 4 cars. This is in reference to my previous post about a solar powered slot.
- First off check your lithium battery with a meter it should read 3.6v if so it will last up to 1 year with the game power turned off. All the battery runs is a small ram chip to keep the bookkeeping and the game setting up to date.
now close the front door, and using the jackpot
reset key on the side of the game, turn the key
once and let go (it's spring loaded).
The display error will go away, and in about
5 seconds the reels should spin and the game
should be ready for play.
System Battery Voltage Low Dell
Now if the game has a bill validator, it may not
work. When you removed the low battery, this
setting may have been lost. If this is the case,
you will need a 'denomination chip' to set the
bill validator to 'on'. You will also need to repeat
the above procedure because you'll be back
at the '61' error code.